DIVESOFT - Scrubbers (Short, Standard and XL)

XL SCRUBBER (3,3 KG)

The XL scrubber cylinder has the same outside measures like the standard scrubber (meaning it does not require any further modifications of CCR Liberty), but it can take 3.3 kg (7.25 lb) of sorbent, which is 30% more than with the standard scrubber. Similarly, the usability duration is increased, which is 3 hours and 15 minutes with the CO2 production of 1.6 l/min. Divers, who know their reals CO2 production can use this scrubber 5 to 8 hours, depending on their CO2 production and the difficulty of the dive.

STANDARD SCRUBBER (2,5 KG)

Standard sized scrubber provides 4-6 hours of scrubbing time. Very comfortable and intuitive to fill. The inner scrubber is made from very fine stainless steel mesh, the lid is made from thick plastic. It allows very comfortable filling. Opening and closing is very quick and simple. The functional and reliable water trap is placed in the bottom. During the stress test according to standard EN 14143:2013 there was proven that the scrubber duration is 2 h 48 min. The test conditions were 4°C, breathing 40 l/min, CO2 production 1.6 l/min. Usual stack time is 4 hours in cold water and 6 hours in warm water with moderate effort.

SHORT SCRUBBER (2,5 KG)

Shortened scrubber provides 4-6 hours of scrubbing time with significant change to outside dimensions. The shortened scrubber is over 4inch/10cm shorteR than standard scrubber. Its clever design saves inside space. The lid is made from a thin stainless steel plate, scrubber walls are made out of a stainless steel mesh, water trap is reduced to bare minimum. This allows us to keep the same outer dimensions with bigger inner volume and scrubbing capacity. It is possible to use this scrubber for 5 hours in cold water or up to 8 hours in warm water and moderate effort.